CassetteUCS/HM VDI 6022

2 and 3 way factory fitted valves, 230V or 24V, ON/OFF or modulating type (shut-off valves and relevant hydraulic kit togethe rwith the auxiliary condensate drain pan are supplied loose).

Special casing colour, available upon request in all the different RAL colours

2 and 3 way factory fitted valves, 230V or 24V, ON/OFF or modulating type (shut-off valves and relevant hydraulic kit togethe rwith the auxiliary condensate drain pan are supplied loose).

Special casing colour, available upon request in all the different RAL colours

Electronic card mounted on the unit, it is designed to fully regulate (directly or via Modbus) the water terminal units. The card is able to control: MANAGEMENT OF OUTPUTS/INPUTS: • ON/OFF 230V VALVES: 2 outputs (230V) for controlling the hot water valve and the cold water valve. • MODULATING VALVES: 2 analog 0-10V Outputs for controlling the hot water valve and the cold water valve. • FAN: 3 outputs (230V) for 3-speed control (Min-Med-Max). • ELECTRIC HEATER: 230V command signal for electrical resistance control. • ROOM TEMPERATURE: Analog input for the connection of a room temperature sensor. • WATER TEMPERATURE: Analog input for the connection of a water temperature probe • DELIVERY AIR TEMPERATURE: Analog input for the connection of a supply air temperature probe • WINDOW CONTACT: Configurable digital input for managing the window opening contact • MULTIFUNCTION INPUT: Configurable input for the management of differential pressure switch, STAND-BY forcing, Season changeover, AC motor alarm, Forcing ventilation, Economy, External temperature sensor. • PUMP/DIFFERENTIAL PRESSURE SWITCH ALARM: Configurable input for managing the condensate pump alarm or differential pressure switch alarm. COMMUNICATION PORTS: • MODBUS LOCAL BUS: 485 communication port with Modbus protocol for the MASTER / SLAVE connection of the units. • MODBUS CONSOLE BUS: 485 communication port with Modbus protocol for connecting the LOCAL Console. • MODBUS BMS BUS: 485 communication port with Modbus protocol for the connection of the BMS supervisor. INTERCONNECTION OF ADDITIONAL MULTIFUNCTION CARD: • CONNECTION FOR MULTITASK CARD: The multitask expansion card makes available through relays the contacts for controlling the 24V ON/OFF valves, alarm contact, fan contact or card status.

Electronic card mounted on the unit, it is designed to fully regulate (directly or via Modbus) the water terminal units. The card is able to control: MANAGEMENT OF OUTPUTS/INPUTS: • ON/OFF 230V VALVES: 2 outputs (230V) for controlling the hot water valve and the cold water valve. • MODULATING VALVES: 2 analog 0-10V Outputs for controlling the hot water valve and the cold water valve. • BRUSHLESS FAN: 0/10V analog output for controlling the brushless motor and relative input for managing any alarms. • ELECTRIC HEATER: 230V command signal for electrical resistance control. • ROOM TEMPERATURE: Analog input for the connection of a room temperature sensor. • WATER TEMPERATURE: Analog input for the connection of a water temperature probe • DELIVERY AIR TEMPERATURE: Analog input for the connection of a supply air temperature probe • WINDOW CONTACT: Configurable digital input for managing the window opening contact • MULTIFUNCTION INPUT: Configurable input for the management of differential pressure switch, STAND-BY forcing, Season changeover, AC motor alarm, Forcing ventilation, Economy, External temperature sensor. • PUMP/DIFFERENTIAL PRESSURE SWITCH ALARM: Configurable input for managing the condensate pump alarm or differential pressure switch alarm. COMMUNICATION PORTS: • MODBUS LOCAL BUS: 485 communication port with Modbus protocol for the MASTER / SLAVE connection of the units. • MODBUS CONSOLE BUS: 485 communication port with Modbus protocol for connecting the LOCAL Console. • MODBUS BMS BUS: 485 communication port with Modbus protocol for the connection of the BMS supervisor. INTERCONNECTION OF ADDITIONAL MULTIFUNCTION CARD: • CONNECTION FOR MULTITASK CARD: The multitask expansion card makes available through relays the contacts for controlling the 24V ON/OFF valves, alarm contact, fan contact or card status.

OPower card for brushless motors, prepared for BMS connection, complete with infrared receiver integrated in the cabinet of the fan coil unit with air temperature sensor on the air intake side. It must be combined with the OIR30 remote control. The console, through the LEDs, allows you to view the operating status and the presence of alarms. The console is equipped with a buzzer to confirm receipt of the command. The remote control allows you to: - set the room temperature; - select the fan speed (Auto-Min-Med-Max); - set the operating mode (summer / winter); - activate the "economy" status.

OPower card, prepared for BMS connection, complete with infrared receiver integrated in the cabinet of the fan coil unit with air temperature sensor on the air intake side. It must be combined with the OIR30 remote control. The console, through the LEDs, allows you to view the operating status and the presence of alarms. The console is equipped with a buzzer to confirm receipt of the command. The remote control allows you to: - set the room temperature; - select the fan speed (Auto-Min-Med-Max); - set the operating mode (summer / winter); - activate the "economy" status.

Round Analog console for wall installation. Available in white (ORC336) or black (ORC346). Functions: - On / Off status setting - Room temperature setting - Selection of the fan speed - Manual Summer / Winter changeover Also available for wall built-in "503" module (white ORC335 or black ORC345).

Round Cabin console for wall installation. Functions: - On / Off status setting - Room temperature setting - Selection of the ventilation speed and manual Summer / Winter switching are managed by the central system Also available for wall built-in "503" module (white ORC635 or black ORC645).

Round Display console for wall installation Available in white (ORC236) or black (ORC246). Functions and features: - Off / Economy / Comfort status - room temperature setting - operating mode setting (cooling-heating-ventilation) - fan speed selection - alarms and warnings - backlit display Also available for wall built-in "503" module (white ORC235 or black ORC245).

Round Touch console for wall installation. Available in white (ORC436) or black (ORC446). Functions and features: - Off / Economy / Comfort status - room temperature setting - operating mode setting (cooling-heating-ventilation) - 4.3 inch screen and capacitive touch - weekly programming of all units connected to the same network. Also available for wall built-in "503" module (white ORC435 or black ORC445).

Round Manager supervisor for small systems (up to 16 units), on wall installation. Available in white (ORS736) or black (ORS746). Functions: - 4.3 inch screen and capacitive touch - Wi-Fi connectivity - connection to a cloud server - remote management via dedicated app - IOT friendly - weekly programming of all units connected to the same network. Also available for wall built-in "503" module (white ORS735 or black ORS736).

Round Master supervisor for intermediate systems (up to 100 units) Functions: - 7-inch screen and capacitive touch, - Wi-Fi connectivity - connection to a cloud server - remote management via dedicated app - IOT friendly - weekly programming of all units connected to the same network - allows interaction between different devices of the HVAC system: (cooling and heating units, HVAC system pumps, modulating valves for radiant systems, thermal zone valves, hydronic terminal units

Round Net, an embedded system complete with web server, which allows the management of plants up to 250 units. Functions: - Wi-Fi connectivity - connection to a cloud server - remote management via dedicated app - IOT friendly - weekly programming of all units connected to the same network - allows interaction between different devices of the HVAC system: (cooling and heating units, HVAC system pumps, modulating valves for radiant systems, thermal zone valves, hydronic terminal units

The Multitask Omnibus 360 card contains 5 relay (powered by OPower card), for the connection of: - 2 electro thermic valves, 24V~ with the same activation mode of VH and VC valves. - An auxiliary fan for air changing and/or free cooling - Contact for the external signal for one or more Warning status of the OPower card (warning for Air Sensor, Check Sensor, Fault Motor) - Contact to manage the external air damper.

Round Clima is the mobile application that permits to manage the supervision system by remote, via smartphone or tablet.

It is compatible with Android and iOS operating systems. It is available only in presence of one of the OSuper devices: Round Manager,

Round Master and Round Net (Round Clima Plus).

2 and 3 way factory fitted valves, 230V or 24V, ON/OFF or modulating type (shut-off valves and relevant hydraulic kit togethe rwith the auxiliary condensate drain pan are supplied loose).

Special casing colour, available upon request in all the different RAL colours

Electronic card mounted on the unit, it is designed to fully regulate (directly or via Modbus) the water terminal units. The card is able to control: MANAGEMENT OF OUTPUTS/INPUTS: • ON/OFF 230V VALVES: 2 outputs (230V) for controlling the hot water valve and the cold water valve. • MODULATING VALVES: 2 analog 0-10V Outputs for controlling the hot water valve and the cold water valve. • FAN: 3 outputs (230V) for 3-speed control (Min-Med-Max). • ELECTRIC HEATER: 230V command signal for electrical resistance control. • ROOM TEMPERATURE: Analog input for the connection of a room temperature sensor. • WATER TEMPERATURE: Analog input for the connection of a water temperature probe • DELIVERY AIR TEMPERATURE: Analog input for the connection of a supply air temperature probe • WINDOW CONTACT: Configurable digital input for managing the window opening contact • MULTIFUNCTION INPUT: Configurable input for the management of differential pressure switch, STAND-BY forcing, Season changeover, AC motor alarm, Forcing ventilation, Economy, External temperature sensor. • PUMP/DIFFERENTIAL PRESSURE SWITCH ALARM: Configurable input for managing the condensate pump alarm or differential pressure switch alarm. COMMUNICATION PORTS: • MODBUS LOCAL BUS: 485 communication port with Modbus protocol for the MASTER / SLAVE connection of the units. • MODBUS CONSOLE BUS: 485 communication port with Modbus protocol for connecting the LOCAL Console. • MODBUS BMS BUS: 485 communication port with Modbus protocol for the connection of the BMS supervisor. INTERCONNECTION OF ADDITIONAL MULTIFUNCTION CARD: • CONNECTION FOR MULTITASK CARD: The multitask expansion card makes available through relays the contacts for controlling the 24V ON/OFF valves, alarm contact, fan contact or card status.

Electronic card mounted on the unit, it is designed to fully regulate (directly or via Modbus) the water terminal units. The card is able to control: MANAGEMENT OF OUTPUTS/INPUTS: • ON/OFF 230V VALVES: 2 outputs (230V) for controlling the hot water valve and the cold water valve. • MODULATING VALVES: 2 analog 0-10V Outputs for controlling the hot water valve and the cold water valve. • BRUSHLESS FAN: 0/10V analog output for controlling the brushless motor and relative input for managing any alarms. • ELECTRIC HEATER: 230V command signal for electrical resistance control. • ROOM TEMPERATURE: Analog input for the connection of a room temperature sensor. • WATER TEMPERATURE: Analog input for the connection of a water temperature probe • DELIVERY AIR TEMPERATURE: Analog input for the connection of a supply air temperature probe • WINDOW CONTACT: Configurable digital input for managing the window opening contact • MULTIFUNCTION INPUT: Configurable input for the management of differential pressure switch, STAND-BY forcing, Season changeover, AC motor alarm, Forcing ventilation, Economy, External temperature sensor. • PUMP/DIFFERENTIAL PRESSURE SWITCH ALARM: Configurable input for managing the condensate pump alarm or differential pressure switch alarm. COMMUNICATION PORTS: • MODBUS LOCAL BUS: 485 communication port with Modbus protocol for the MASTER / SLAVE connection of the units. • MODBUS CONSOLE BUS: 485 communication port with Modbus protocol for connecting the LOCAL Console. • MODBUS BMS BUS: 485 communication port with Modbus protocol for the connection of the BMS supervisor. INTERCONNECTION OF ADDITIONAL MULTIFUNCTION CARD: • CONNECTION FOR MULTITASK CARD: The multitask expansion card makes available through relays the contacts for controlling the 24V ON/OFF valves, alarm contact, fan contact or card status.

OPower card for brushless motors, prepared for BMS connection, complete with infrared receiver integrated in the cabinet of the fan coil unit with air temperature sensor on the air intake side. It must be combined with the OIR30 remote control. The console, through the LEDs, allows you to view the operating status and the presence of alarms. The console is equipped with a buzzer to confirm receipt of the command. The remote control allows you to: - set the room temperature; - select the fan speed (Auto-Min-Med-Max); - set the operating mode (summer / winter); - activate the "economy" status.

OPower card, prepared for BMS connection, complete with infrared receiver integrated in the cabinet of the fan coil unit with air temperature sensor on the air intake side. It must be combined with the OIR30 remote control. The console, through the LEDs, allows you to view the operating status and the presence of alarms. The console is equipped with a buzzer to confirm receipt of the command. The remote control allows you to: - set the room temperature; - select the fan speed (Auto-Min-Med-Max); - set the operating mode (summer / winter); - activate the "economy" status.

Round Analog console for wall installation. Available in white (ORC336) or black (ORC346). Functions: - On / Off status setting - Room temperature setting - Selection of the fan speed - Manual Summer / Winter changeover Also available for wall built-in "503" module (white ORC335 or black ORC345).

Round Cabin console for wall installation. Functions: - On / Off status setting - Room temperature setting - Selection of the ventilation speed and manual Summer / Winter switching are managed by the central system Also available for wall built-in "503" module (white ORC635 or black ORC645).

Round Display console for wall installation Available in white (ORC236) or black (ORC246). Functions and features: - Off / Economy / Comfort status - room temperature setting - operating mode setting (cooling-heating-ventilation) - fan speed selection - alarms and warnings - backlit display Also available for wall built-in "503" module (white ORC235 or black ORC245).

Round Touch console for wall installation. Available in white (ORC436) or black (ORC446). Functions and features: - Off / Economy / Comfort status - room temperature setting - operating mode setting (cooling-heating-ventilation) - 4.3 inch screen and capacitive touch - weekly programming of all units connected to the same network. Also available for wall built-in "503" module (white ORC435 or black ORC445).

Round Manager supervisor for small systems (up to 16 units), on wall installation. Available in white (ORS736) or black (ORS746). Functions: - 4.3 inch screen and capacitive touch - Wi-Fi connectivity - connection to a cloud server - remote management via dedicated app - IOT friendly - weekly programming of all units connected to the same network. Also available for wall built-in "503" module (white ORS735 or black ORS736).

Round Master supervisor for intermediate systems (up to 100 units) Functions: - 7-inch screen and capacitive touch, - Wi-Fi connectivity - connection to a cloud server - remote management via dedicated app - IOT friendly - weekly programming of all units connected to the same network - allows interaction between different devices of the HVAC system: (cooling and heating units, HVAC system pumps, modulating valves for radiant systems, thermal zone valves, hydronic terminal units

Round Net, an embedded system complete with web server, which allows the management of plants up to 250 units. Functions: - Wi-Fi connectivity - connection to a cloud server - remote management via dedicated app - IOT friendly - weekly programming of all units connected to the same network - allows interaction between different devices of the HVAC system: (cooling and heating units, HVAC system pumps, modulating valves for radiant systems, thermal zone valves, hydronic terminal units

The Multitask Omnibus 360 card contains 5 relay (powered by OPower card), for the connection of: - 2 electro thermic valves, 24V~ with the same activation mode of VH and VC valves. - An auxiliary fan for air changing and/or free cooling - Contact for the external signal for one or more Warning status of the OPower card (warning for Air Sensor, Check Sensor, Fault Motor) - Contact to manage the external air damper.

Round Clima is the mobile application that permits to manage the supervision system by remote, via smartphone or tablet.

It is compatible with Android and iOS operating systems. It is available only in presence of one of the OSuper devices: Round Manager,

Round Master and Round Net (Round Clima Plus).

Microprocessor control, for "on wall" installation, designed for water terminal units equipped with Brushless motors (EST Inverter Technology): SV, SV/AF, PV, PV/AF, SVR.
It permits to control the type of ventilation (fan thermostated or fan continuously running) the fan speeds (0-10V or Auto), SUMMER/WINTER switch and room temperature thermostat.

The brushless electric motor is composed by a rotor having permanent magnets, whosemagnetic fields interact with the ones producedby the stator winding.
The transfer of current isno longer by mechanical commutation (sliding contacts) but by an electronic commutation system: one electronic controller (inverter) powers the motor’s stator and generates rotating magnetic fields, that determine the rotor’s speed.

2 and 3 way factory fitted valves, 230V or 24V, ON/OFF or modulating type (shut-off valves and relevant hydraulic kit togethe rwith the auxiliary condensate drain pan are supplied loose).

Special casing colour, available upon request in all the different RAL colours

Electronic card mounted on the unit, it is designed to fully regulate (directly or via Modbus) the water terminal units. The card is able to control: MANAGEMENT OF OUTPUTS/INPUTS: • ON/OFF 230V VALVES: 2 outputs (230V) for controlling the hot water valve and the cold water valve. • MODULATING VALVES: 2 analog 0-10V Outputs for controlling the hot water valve and the cold water valve. • FAN: 3 outputs (230V) for 3-speed control (Min-Med-Max). • ELECTRIC HEATER: 230V command signal for electrical resistance control. • ROOM TEMPERATURE: Analog input for the connection of a room temperature sensor. • WATER TEMPERATURE: Analog input for the connection of a water temperature probe • DELIVERY AIR TEMPERATURE: Analog input for the connection of a supply air temperature probe • WINDOW CONTACT: Configurable digital input for managing the window opening contact • MULTIFUNCTION INPUT: Configurable input for the management of differential pressure switch, STAND-BY forcing, Season changeover, AC motor alarm, Forcing ventilation, Economy, External temperature sensor. • PUMP/DIFFERENTIAL PRESSURE SWITCH ALARM: Configurable input for managing the condensate pump alarm or differential pressure switch alarm. COMMUNICATION PORTS: • MODBUS LOCAL BUS: 485 communication port with Modbus protocol for the MASTER / SLAVE connection of the units. • MODBUS CONSOLE BUS: 485 communication port with Modbus protocol for connecting the LOCAL Console. • MODBUS BMS BUS: 485 communication port with Modbus protocol for the connection of the BMS supervisor. INTERCONNECTION OF ADDITIONAL MULTIFUNCTION CARD: • CONNECTION FOR MULTITASK CARD: The multitask expansion card makes available through relays the contacts for controlling the 24V ON/OFF valves, alarm contact, fan contact or card status.

Electronic card mounted on the unit, it is designed to fully regulate (directly or via Modbus) the water terminal units. The card is able to control: MANAGEMENT OF OUTPUTS/INPUTS: • ON/OFF 230V VALVES: 2 outputs (230V) for controlling the hot water valve and the cold water valve. • MODULATING VALVES: 2 analog 0-10V Outputs for controlling the hot water valve and the cold water valve. • BRUSHLESS FAN: 0/10V analog output for controlling the brushless motor and relative input for managing any alarms. • ELECTRIC HEATER: 230V command signal for electrical resistance control. • ROOM TEMPERATURE: Analog input for the connection of a room temperature sensor. • WATER TEMPERATURE: Analog input for the connection of a water temperature probe • DELIVERY AIR TEMPERATURE: Analog input for the connection of a supply air temperature probe • WINDOW CONTACT: Configurable digital input for managing the window opening contact • MULTIFUNCTION INPUT: Configurable input for the management of differential pressure switch, STAND-BY forcing, Season changeover, AC motor alarm, Forcing ventilation, Economy, External temperature sensor. • PUMP/DIFFERENTIAL PRESSURE SWITCH ALARM: Configurable input for managing the condensate pump alarm or differential pressure switch alarm. COMMUNICATION PORTS: • MODBUS LOCAL BUS: 485 communication port with Modbus protocol for the MASTER / SLAVE connection of the units. • MODBUS CONSOLE BUS: 485 communication port with Modbus protocol for connecting the LOCAL Console. • MODBUS BMS BUS: 485 communication port with Modbus protocol for the connection of the BMS supervisor. INTERCONNECTION OF ADDITIONAL MULTIFUNCTION CARD: • CONNECTION FOR MULTITASK CARD: The multitask expansion card makes available through relays the contacts for controlling the 24V ON/OFF valves, alarm contact, fan contact or card status.

OPower card for brushless motors, prepared for BMS connection, complete with infrared receiver integrated in the cabinet of the fan coil unit with air temperature sensor on the air intake side. It must be combined with the OIR30 remote control. The console, through the LEDs, allows you to view the operating status and the presence of alarms. The console is equipped with a buzzer to confirm receipt of the command. The remote control allows you to: - set the room temperature; - select the fan speed (Auto-Min-Med-Max); - set the operating mode (summer / winter); - activate the "economy" status.

OPower card, prepared for BMS connection, complete with infrared receiver integrated in the cabinet of the fan coil unit with air temperature sensor on the air intake side. It must be combined with the OIR30 remote control. The console, through the LEDs, allows you to view the operating status and the presence of alarms. The console is equipped with a buzzer to confirm receipt of the command. The remote control allows you to: - set the room temperature; - select the fan speed (Auto-Min-Med-Max); - set the operating mode (summer / winter); - activate the "economy" status.

Round Analog console for wall installation. Available in white (ORC336) or black (ORC346). Functions: - On / Off status setting - Room temperature setting - Selection of the fan speed - Manual Summer / Winter changeover Also available for wall built-in "503" module (white ORC335 or black ORC345).

Round Cabin console for wall installation. Functions: - On / Off status setting - Room temperature setting - Selection of the ventilation speed and manual Summer / Winter switching are managed by the central system Also available for wall built-in "503" module (white ORC635 or black ORC645).

Round Display console for wall installation Available in white (ORC236) or black (ORC246). Functions and features: - Off / Economy / Comfort status - room temperature setting - operating mode setting (cooling-heating-ventilation) - fan speed selection - alarms and warnings - backlit display Also available for wall built-in "503" module (white ORC235 or black ORC245).

Round Touch console for wall installation. Available in white (ORC436) or black (ORC446). Functions and features: - Off / Economy / Comfort status - room temperature setting - operating mode setting (cooling-heating-ventilation) - 4.3 inch screen and capacitive touch - weekly programming of all units connected to the same network. Also available for wall built-in "503" module (white ORC435 or black ORC445).

Round Manager supervisor for small systems (up to 16 units), on wall installation. Available in white (ORS736) or black (ORS746). Functions: - 4.3 inch screen and capacitive touch - Wi-Fi connectivity - connection to a cloud server - remote management via dedicated app - IOT friendly - weekly programming of all units connected to the same network. Also available for wall built-in "503" module (white ORS735 or black ORS736).

Round Master supervisor for intermediate systems (up to 100 units) Functions: - 7-inch screen and capacitive touch, - Wi-Fi connectivity - connection to a cloud server - remote management via dedicated app - IOT friendly - weekly programming of all units connected to the same network - allows interaction between different devices of the HVAC system: (cooling and heating units, HVAC system pumps, modulating valves for radiant systems, thermal zone valves, hydronic terminal units

Round Net, an embedded system complete with web server, which allows the management of plants up to 250 units. Functions: - Wi-Fi connectivity - connection to a cloud server - remote management via dedicated app - IOT friendly - weekly programming of all units connected to the same network - allows interaction between different devices of the HVAC system: (cooling and heating units, HVAC system pumps, modulating valves for radiant systems, thermal zone valves, hydronic terminal units

The Multitask Omnibus 360 card contains 5 relay (powered by OPower card), for the connection of: - 2 electro thermic valves, 24V~ with the same activation mode of VH and VC valves. - An auxiliary fan for air changing and/or free cooling - Contact for the external signal for one or more Warning status of the OPower card (warning for Air Sensor, Check Sensor, Fault Motor) - Contact to manage the external air damper.

Round Clima is the mobile application that permits to manage the supervision system by remote, via smartphone or tablet.

It is compatible with Android and iOS operating systems. It is available only in presence of one of the OSuper devices: Round Manager,

Round Master and Round Net (Round Clima Plus).

Microprocessor control, for "on wall" installation, designed for water terminal units equipped with Brushless motors (EST Inverter Technology): SV, SV/AF, PV, PV/AF, SVR.
It permits to control the type of ventilation (fan thermostated or fan continuously running) the fan speeds (0-10V or Auto), SUMMER/WINTER switch and room temperature thermostat.

The brushless electric motor is composed by a rotor having permanent magnets, whosemagnetic fields interact with the ones producedby the stator winding.
The transfer of current isno longer by mechanical commutation (sliding contacts) but by an electronic commutation system: one electronic controller (inverter) powers the motor’s stator and generates rotating magnetic fields, that determine the rotor’s speed.

The galvanized metal electric panel includes, besides the standard terminal board (see QEC00), a double insulated transformer (230/24 Vac 10 VA) for the power supply to modulating valves.
It is supplied as standard in combination to CER10 and CER30 controllers.

The galvanized metal electric panel includes, besides the standard terminal board (see QEC00), a 230 Vac relay card for supporting the electric heater and/or for controlling the fan speeds in master/slave solution.
It can be used in combination to the controllers CMR00, CMR10, CER00, CER20.

The galvanized metal electric panel includes, besides the standard terminal board (see QEC00), a 24 Vac relay card for controlling the fan speeds in master/slave solution, together with a double insulated transformer (230/24 Vac 10 VA) for the power supply to modulating valves and/or 24 Vac electronic cards.
It can be used in combination to the controllers CER10, CER31, CER00 in 24V configuration and CER20 in 24 V configuration.

Remote microprocessor control suitable for the complete control of a unit (fancoil, cassette, blower), in particular: type of ventilation (thermostated or continuously running), fan speed selection, Summer/Winter switch and room temperature thermostat. The controller is provided with terminals for the connection of other options:
economy function (set-point variation of 6 °C), external centralized Summer/Winter changeover, window contact, minimum water temperature thermostat (TM) and cooling «EVC» and/or heating «EVH» on/off valves.

FEATURES
• Selector for the ventilation(THERMOSTATED – OFF – CONTINUOUSLY RUNNING).
• Fan speed selector (HIGH – MED – LOW). A fourth position, with no symbol on it, allows only to reset the filter alarm. In no other situation the selector must stay in this position.
• Room temperature knob (8÷30 °C). The «Comfort zone» is duly highlighted (about 20÷25 °C).
• Plastic pins for limiting the temperature range.
• Antifrost function.
• LED signal for the operating mode.
• LED signal for incorrect operation.

Remote microprocessor control suitable for the complete control of a unit (fancoil, cassette or sucted unit), in particular: type of ventilation (thermostated or continuously running), fan speed selection, Summer/Winter switch and room temperature thermostat. The controller is provided with terminals for the connection of other options: economy function (set-point variation of 6 °C), external centralized Summer/Winter changeover, window contact, minimum water temperature thermostat (TM) and cooling«EVC» and/or heating «EVH» modulating valves. Selector for the ventilation (THERMOSTATED – OFF – CONTINUOUSLY RUNNING). • Fan speed selector (HIGH – MED – LOW). A fourth position, with no symbol on it, allows only to reset the filter alarm. In no other situation the selector must stay in this position. • Room temperature knob (8÷30 °C). The «Comfort zone» is duly highlighted (about 20÷25 °C). • Plastic pins for limiting the temperature range. • Antifrost function. • LED signal for the operating mode.

Remote microprocessor control suitable for the complete control of a unit (fancoil, cassette, blower), in particular: type of ventilation (thermostated or continuously running), fan speed selection, Summer/Winter switch and room temperature thermostat.
The controller is provided with terminals for the connection of other options: economy function (set-point variationof 6 °C), external centralized Summer/Winter change over, window contact, minimum water temperature thermostat (TM) and cooling «EVC» and/or heating «EVH» on/off valves.

FEATURES
• Selector for the ventilation (THERMOSTATED - OFF - CONTINUOUSLY RUNNING)
• Fan speed selector (AUTO – HIGH – MED – LOW).
• Room temperature knob (8÷30 °C). The «Comfort zone» is duly highlighted (about 20÷25 °C).
• Plastic pins for limiting the temperature range.
• LED signal for the operating mode.
• LED signal for incorrect operation.

Remote microprocessor control suitable for the complete control of a unit (fancoil, cassette, blower), in particular: type of ventilation (thermostated or continuously running), fan speed selection, Summer/Winter switch and room temperature thermostat.
The controller is provided with terminals for the connection of other options: economy function (set-point variation of 6 °C), external centralized Summer/Winter changeover, window contact, minimum water temperature thermostat (TM) and cooling «EVC» and/or heating «EVH» on/off valves.
Power supply 230V

Remote microprocessor control suitable for the complete control of a unit (fancoil, cassette, blower), in particular: type of ventilation (thermostated or continuously running), fan speed selection, Summer/Winter switch and room temperature thermostat.
The controller is provided with terminals for the connection of other options: economy function (set-point variation of 6 °C), external centralized Summer/Winter changeover, window contact, minimum water temperature thermostat (TM) and cooling «EVC» and/or heating «EVH» on/off valves.
Power supply 24V

3m length NTC sensor (10K, 25°C), requested when a fancoil unit is controlled by a regulator with microprocessor, in a 2 pipe system, for both heating and cooling operations.

1 m length NTC sensor (10K, 25 °C), to be installed on the air intake of the fancoil unit.